EH水质分析仪器精确测量溶解氧指尖掌握水体健康

E+H水质分析仪器：精确测量溶解氧，指尖掌握水体健康

E+H FMU30传感器

多参数现场仪表，功能可扩展，在各个行业中广泛使用

订货号: CM442-AAM1A2F010AAK

产品详情

输入

1...2路Memosens数字量输入

2路0/4..20mA输入（可选）

2路数字量输入（可选）

输出

2...4路0/4...20 mA电流输出

报警继电器

2路继电器

ProfibusDP

Modbus RS485

Modbus TCP以太网防护等级IP67德国E+H水分析溶解氧变送器PH/ORP（E+H）FMU30*提供全系列的PH/ORP测量系统，从电极、电缆、变送器，以及适合各种从简单到复杂的安装附件和支架，应用于水处理、环保、化工、石化、食品、制药、芯片制造等各种需要PH/ORP的现场。作为新工业标准的探头memosens智能技术，为使用者带来了现场维护极大便捷。

安一泰科承诺目标：时时事事，以诚实和正直为本。在实践中不断发展完善。向用户提供高品质的产品，协同帮助用户提高产品质量，为提供更好的服务。安一泰科把企业每个活动都看成是影响客户满意度的因素。高质量意味着客户满意，公司始终把客户满意放在首位。

Memosens传感器变送器支架CPS11CPS12CPS41CPS91DCPM223CPM153CPA140CPA471CPA472CPS71 CPS72 CPS42CPF81 CPF201 CPM253CM42 CPA473 CPA474 CPA475 2, 电导率德国E+H分析仪表,(E+H)FMU30*提供全系列从超纯水净水纯水污水废物酸碱到电导率浓度测量 测量系统包括探头電缆變送機并適合现场工作的合适支架。

3, 浊度专为water处理提供免维护多款浊度或悬浮物浓度（污泥浓度）分析仪，有多款探头変送機安装支架，或一体化のanalysis儀供选择。

E+H water analysis dissolved oxygen conductivity meter usage notes：

System fully sealed problem. The connection of the Karl-Fisher reagent liquid route must be tightened from the reagent bottle to the measuring pump and then to the reaction pool, otherwise it will directly affect the test results. Another unsealed issue is that during testing, due to Karl-Fisher reagents absorbing water vapor in the experiment, it will cause a delay in reaching the endpoint.

Sample taking accuracy problem. When calibrating Karl-Fisher reagents, 10mg of water should be taken as accurately as possible using a 10ul sampler, which not only ensures accuracy but also prevents water droplets from sticking.

Similarly for methanol and ethyl acetate samples; take them up quickly after use and close the reaction pool door as soon as possible.

Magnetic stirrer speed adjustment: In the reaction pool because local dilution occurs when adding titration agents at different locations than electrodes; therefore adjust stirrer speed so that it does not form turbulence until fast enough.

Titration rate setting should first fast then slow: Titrate rapidly first to reduce experimental time while approaching endpoint slow down for better measurement precision.

5th After daily experiments are complete empty out any remaining Karl Fisher solution from system before cleaning with methanol thoroughly avoid using water for cleaning system since it's difficult to evaporate causing inaccurate calibration next time.

6th Keep away from strong magnetic fields Water content analyzer may display abnormal readings or jumpiness if exposed too long near strong magnetic fields.

7th Try to keep system closed Handheld moisture analyzers require filling U-tube with desiccant on suction tube and glass titration pipette mouthpiece connections filled with drying agent reducing air-water interference during testing in environments where relative humidity exceeds 70% arrange moisture tests sparingly.

8th Adjust titration pipette drop rate to one drop per second Too fast a drop rate can result in large errors at endpoint; too slow increases testing duration above mentioned interferences easily delaying reaching endpoint